| Starter Set-3/8" and ½" Drives: |
ID: 165 |
 |
|
|
15 -12 point Combination Flat Wrenches, 5/16"- 1-1/4"
9- 12 point Standard Sockets, 3/8" Drive, 3/8"-7/8"
3" &12" extensions
7" Knurled Grip Ratchet
Flex Handle, 8-1/2" Knurled Steel Grip
Universal
Speeder
Ball Peen Hammer, Fiberglass Handle, 16oz
Dead Blow Hammer with Super Grip, 1LB
Phillips Screwdrivers #2, 4", #1,-3", #3-6"
Cabinet Tip Screwdriver, 3/16"-3"
Round Shank Screwdriver, 1-4"- 1-1/2"
Square Shank Screwdrivers, ¼"-4"; 5/16"-6"; 3/8"- 8"
Gasket Scraper w/3 Flute Handle, 1-1/2"
Hacksaw
Center Punch, 3/8"
Starter Punches, 3/16" x 5", ¼", 5/16"
Pin Punches, 3/16", 3/32", 1/8"
Cold Chisels, ¼", 3/8", ½"
Cape Chisel, 5/16"
Round Nose Chisel, 5/16"
Punch & Chisel Holder w/ 3 Flute Handle
6" and 10" Adjustable Chrome Wrenches
Long Nose Pliers w/ Side Cutter, 6"
Lap Joint Pliers, 7"
Tongue and Groove Pliers, 10"
Slip Joint Pliers, 7"
Straight Jaw Locking Pliers, 7"
Aviation Strips, Cuts Left, Red, 10"
Hex Key Set, Short Arm, 7 pieces in pouch
WT17 Heavy-Duty Mechanic's Box with Tray |
|
