| Core Bit 1 in. : |
ID: 48-20-5005 |
 |
|
|
Core Bit 1 in.
Milwaukee's Core Bits are ideal for large hole drilling where depth is relatively
shallow. The Core Bit cuts a kerf only. The usable depth of Thick Wall Core Bits
is 4-3/8 inch. The inside core must be removed by the operator before deeper
drilling can be accomplished. The Thin Wall construction is ideal for smaller
hammers and newer concrete. A 7-1/2 inch extension is available to allow for
the deeper holes to be drilled. The appropriate (dependant on the diameter) SDS
Plus drive Shank must be used to drive the Core Bit. Use of Center Pin and Guide
Plate is not recommended for positioning and starting a 1 inch hole. Thin Wall
Core Bits are available from 1 inch to 6 inch diameters. See Thick Wall Core
Bits for cured/seasoned concrete or use with larger hammers.
Product Features
1 in. diameter
Usable cutting depth 3 in.
Thin wall
Use with SDS core bit shank 48-03-3545 (8 in.) or 48-03-3551 (12 in.)
|
|
