| Core Bit 6 in. : |
ID: 48-20-5065 |
 |
|
|
Core Bit 6 in.
Milwaukee's Core Bits are ideal for large hole drilling where depth is relatively
shallow. The Core Bit cuts a kerf only. The usable depth of Thick Wall Core Bits
is 4-3/8 inch. The inside core must be removed by the operator before deeper
drilling can be accomplished. The Thick Wall construction is ideal for larger
hammers and more seasoned/cured concrete. A 7-1/2 inch extension is available
to allow for the deeper holes to be drilled. The appropriate (dependant on the
diameter) SDS Plus Drive Shank must be used to drive the Core Bit. Use 48-20-6155
Center Pin and 48-20-6163 Guide Plate for positioning and starting the hole.
Thin Wall Core Bits are available from 1 inch to 6 inch diameters. See Thick
Wall Core Bits for cured concrete and/or larger hammers.
Product Features
6 in. diameter
Usable cutting depth 3 in.
Thin wall
Use with SDS core bit shank 48-03-3555 (8 in.) or 48-03-3561 (12 in.)
|
|
