| Pro Panel Saw: |
ID: PRO52 |
 |
|
|
*Shipping TBD at time of
order. Welding Mart will call with shipping charges
after order is placed in order to get you the lowest
possible shipping rates due to products size &
weight.
Pro Panel Saw 52" Crosscut x 10' Wide Frame
The sawsystems pro52 features
are:
._1-1/2 in Square Tubular
Frame that is fully welded
and Powder Coated. for the sawsystems
pro52
._Interchangeable
Rotating Saw Plate for the sawsystems
pro52
._15 amp 3 hp Porter
Cable Motor for the sawsystems
pro52
._Vacuum Hose that attaches to
saw motor for the sawsystems
pro52
._1-3/4 in x 11 Ga. Wall,
Nickel Chrome Track Tubes
for the sawsystems pro52
._Cord Holder for the
sawsystems pro52
._Carriage Return for the
sawsystems pro52
._General Purpose 20 Tooth
carbide saw blade for the sawsystems
pro52
._Fence Floor Support
Plates, 1 - Year Warranty on
Parts for the sawsystems pro52
._Picture is shown with options:
Intermediate Fence Systems,
Spring Hold Down, Horizontal and Vertical Tape
Systems for the sawsystems pro52
Manufacturer Information for the sawsystems
pro52
The Professional Model features Full Support on
both sides of the frame
Includes
1. Rotating Saw Plate (pull two pins to
rotate).
2. Dust / Safety Shield for saw motor.
3. 1-1/2" Square Tubular Frame that is fully
welded and powder coated.
4. Carriage return that does not have to be
assembled by you.
5. Cord holder.
6. 1-3/4 inch nickel chromed track tubes that are
1/8" thick.
7. Fence support plate.
8. General Purpose 20 Tooth carbide saw
blade.
9. A backer board, for support and does not have
to be removed to rotate the
saw 90 degrees.
10. Factory Squared, Aligned and Secured so
your Panel Saw is always in square.
11. Trigger Lock
12. Steel Hubs for Material Wheels.
13. Retraction Lock to prevent accidental
movement of carriage plate.
14. Strip Plate to support cutting of small
materials.
15. Easily replaceable 15 amp, Porter Cable saw
motor.
16. Vacuum Tube Dust Collector and Hose.
17. Saw motor able to bevel and score cut.
Accessories Available
Razor Knife Cutter, Patent Pending
Router Plate that does not require clamps
Frame Extensions for 5 ft. Frame, Left and Right
Second Set of Track Tube Bearings
Horizontal Tape System with Stop
Spring Hold Down
Vertical Tape System with Rip Gages
Full Length Intermediate Fence Systems (for full
or half frames)
Stand and Wheels
Saw Systems manufactures low cost, high
quality, and accurate vertical panel
saws and razor knife cutters for a wide variety of
uses. Saw Systems panel saws
increase your productivity at just a fraction of the
cost and size of other,
more expensive machines.
- Panel saws are much safer, quicker, and
easier to use than their table saw
counterparts.
- The saw blade is guarded behind the panel
saw plate and by a blade guard
on and off the panel saw.
- Fast, repetitive cuts can be quickly re-
produced through the use of a stop
bar and tape system mounted on the panel saw.
- Accurate, square cuts are made on the panel
saw the first time, every time.
- Production costs are lower saving time and
money.
- A wide variety of panel saw blades are
available for a diversity of applications.
- All panel saws are palleted to prevent shipping
damage and are immediately
ready for operation.
|
|
